EMC Qlogic QLA23xx Guía de instalación Pagina 97
- Pagina / 128
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Manually installing the HBA driver – Advanced users
97
Miscellaneous Planning and Procedures
12. If prompted, click Yes to continue the installation.
13. Click Finish to complete the installation.
14. If the system requests that you reboot the system and you have
other adapters to update, select No; then click Close.
15. If the system again requests that you reboot the system and you
have other adapters to update, select No; then click Close.
16. If you have other adapters to update, select the next adapter
under SCSI & RAID Controllers and repeat steps 6 through 15.
When all adapters have had their drivers updated, select Yes to
the reboot prompt.
For more information on connecting to a SAN and installing
drivers/firmware on HP Proliant BL p-Class server blades, see the
"how to" guide, Connecting ProLiant BL p-Class server blades to a third
party SAN, available at the website as follows:
http://h200005.www2.hp.com/bc/docs/support/SupportManual
/c00220357/c00220357.pdf
Upgrading to Windows 2003 from Windows 2000
Note the following if upgrading to Windows 2003:
◆ Upgrading from Windows 2000 - The Windows 2000 drivers may
be preserved while upgrading to Windows 2003. These SCSIPort
drivers (including the native Windows 2003 SCSIPort drivers) are
not supported by EMC for Windows 2003. You should obtain the
correct Windows 2003 drivers. Refer to “Downloading latest
QLogic drivers/firmware/BIOS files” on page 16, and reinstall
the drivers after the upgrade is complete.
◆ Currently, to upgrade from Windows 2000 to Windows 2003, you
must first uninstall PowerPath. After upgrading the host, you can
reinstall an approved Windows 2003 version. Please refer to the
EMC PowerPath documentation for further details. You may
wish to disconnect your storage during the Windows upgrade,
and reconnect it after the approved Windows 2003 drivers are
installed.
- Windows Environment 1
- Contents 3
- Chapter 3 Troubleshooting 5
- Installation and 15
- Configuration 15
- How this guide works 16
- Installing the HBA 18
- STOP: 0X0000007B 19
- HBA edge connecters 21
- PCI Express slots 22
- PCI Express slots aligned 22
- 2322ipx.bin 26
- QLogic banner 27
- Main Fast!UTIL options window 28
- Configuration settings window 29
- Adapter settings window 29
- Enter 32
- Warning dialog 33
- Fast!UTIL options window 34
- QLogic BIOS banner screen 34
- Firmware boot manager menu 36
- Device mapping table 37
- QLogic directory 39
- QLogic efiutil all upgrade 41
- QLA2340/QLA2342 HBAs 42
- QLogic Fibre Channel drivers 44
- Driver handle numbers 45
- -s 5f 62 45
- Edit adapter settings 46
- Connection option 47
- Figure 33 Options set 49
- RAMDISK 50
- Windows 51
- HBA selection screen 55
- Windows setup screen 56
- Base article Q240672.) 57
- Existing partitions 57
- Pre-installation guidelines 60
- Driver installation/ upgrade 61
- SANsurfer driver selection 63
- Post-installation procedures 67
- SANsurfer HBA install wizard 68
- Show SAN 71
- SANsurfer icon 72
- Connect to the host 73
- Miscellaneous 77
- Planning and 77
- Procedures 77
- Download firmware dialog 83
- F1 to enter the server BIOS 90
- Enter. This boot device 90
- BladeServer restrictions 91
- Driver revision 92
- Where to find the driver 93
- Windows 2003 STORPort updates 93
- STORPort drivers 94
- /c00220357/c00220357.pdf 97
- Utilities tabbed page 101
- ◆ 2.0.21 — Initial Release 102
- QLogic advanced utilities 103
- EMC CLARiiON storage arrays 104
- Set the HBA FC-AL loop ID 107
- Reconfigure the HBA jumper 110
- Troubleshooting 111
- Volume Sizes 112
- Host after the rebooted 117
- Known issues 118
- Problems and solutions 119
- Problem 4 120
- Problem 5 120
- Problem 6 120
- Problem 7 121
- Problem 8 121
- Third-Party Software 123
- SANsurfer version history 124
- VERITAS Volume Manager 3.0 126
- VERITAS Foundation Suite 4.1 127
- VERITAS Foundation Suite 4.2 127
- VERITAS Foundation Suite 4.3 128
Relacionado con productos y manuales para Redes EMC Qlogic QLA23xx
Redes EMC Qlogic QLA22xx Guía de instalación
(78 paginas)
(78 paginas)
Redes EMC QLogic Guía de instalación
(216 paginas)
(216 paginas)
Redes EMC QLogic Guía de instalación
(150 paginas)
(150 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.057 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales