EMC Qlogic QLA23xx Guía de instalación descargar pdf (Pagina 30)

EMC Fibre Channel and iSCSI with QLogic Host Bus Adapters in the Windows Environment

Installation and Configuration

Press Esc to return to the previous Configuration Settings (as

shown in Figure 8 on page 29).

Figure 10 Configuration settings window

6. From the Configuration Settings dialog, select Selectable Boot

Settings and press Enter.

Figure 11 Selectable boot settings window

7. Selectable Boot is Disabled by default. Select this setting and

press Enter to enable Selectable Boot.

8. Scroll down to the (Primary) Boot Port Name, LUN: setting, and

press Enter.

The Fast!UTIL will now scan for attached FC devices (as shown

in Figure 12 on page 31). If physical connectivity to the array is

setup properly via zoning, then the array port will be found after

this scan. Use the <PageUp> and <PageDown> keys to navigate

the list of target IDs for the array port being used for boot.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 127 128

Sin comentarios

EMC Qlogic QLA23xx Guía de instalación Pagina 30