EMC Qlogic QLA23xx Guía de instalación descargar pdf (Pagina 45)

Booting from the external storage array

Installation and Configuration

The order of the HBA instances listed is the order in which they

have been enumerated by the system. This does not necessarily

correspond to PCI slot numbering. In this example, the two

QLogic HBAs installed in the server are using driver handles 5F

and 60, respectively.

a. Type

drvcfg.

b. Press Enter.

Figure 28 Driver handle numbers

12. Find the driver handle numbers that correspond to those listed

for the QLogic HBAs (as shown in Figure 28). Note the two digits

(proceeded by Ctrl, as shown in Figure 28) next to the driver

handles for the QLogic HBAs. These are control handles.

13. Determine the HBA instance that will be used for boot, and enter

the QLogic Fibre Channel Driver Configuration Utility by

typing drvcfg -s <driver handle> <control handle> (where

driver handle and control handle are the values that correspond

to the HBA instance to be used for boot. In this example, "

drvcfg

-s 5f 62

" is used.)

14. Press Enter.

The Fibre Channel Driver Configuration Utiliity menu will be

displayed (as shown in Figure 29 on page 46).

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 127 128

Sin comentarios

EMC Qlogic QLA23xx Guía de instalación Pagina 45