EMC Qlogic QLA23xx Guía de instalación descargar pdf (Pagina 95)

Manually installing the HBA driver – Advanced users

Miscellaneous Planning and Procedures

Installation procedure for Windows 2000 and Windows 2003 hosts

To install the driver into a Windows 2000 or Windows 2003 host,

follow these steps:

1. Boot the host with Windows 2000 or Windows 2003.

2. From the Windows taskbar, select Start > Run, then type

Compmgmt.msc and press Enter.

3. In the left pane of the Computer Management window, click the

Device Manager icon.

4. If Windows Plug-n-Play does not detect your QLA23xx HBA

model, it will be listed as Unknown or as a Fibre Channel

Controller under the Other Devices icon in the right pane.

Windows 2000 configurations with Service Pack 1 or higher and

Windows 2003 configurations may be able to detect QLA23xx

HBAs. If this occurs, the HBA will already be listed under SCSI

Devices. Instead of proceeding with these installation steps,

follow the instructions under “Updating the HBA driver in a

Windows 2000 or Windows 2003 host” on page 96. Double-click

the first instance of SCSI Controller under Other Devices.

5. In the next window, click ReInstall Driver, then Next.

6. Select Display a list of the known drivers for this device so that

I can choose a specific driver, then click Next.

7. Select SCSI and RAID Controllers, then click Next.

8. Click Have Disk.

9. Enter the path to the diskette containing the driver (for example,

A:\), then click OK.

10. Select the appropriate QLogic HBA from the list of drivers that

appears; then click Next.

11. In the next window, click Next.

12. Click Yes to continue the installation.

13. Click Finish to complete the driver installation.

14. The system requests that you reboot the system. Select No and

click Close.

15. The system again requests that you reboot the system. Select No

again.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 127 128

Sin comentarios

EMC Qlogic QLA23xx Guía de instalación Pagina 95