EMC Qlogic QLA23xx Guía de instalación descargar pdf (Pagina 126)

126

EMC Fibre Channel and iSCSI with QLogic Host Bus Adapters in the Windows Environment

Third-Party Software

VERITAS Volume Management Software for Windows operating

systems

Note: Refer to the latest EMC Support Matrix to determine which VERITAS

Volume Manager 3.x configurations are supported, and what service packs

may be required.

CAUTION

Configuring large numbers of device paths with VERITAS Volume

Manager can cause a Windows system to boot very slowly, and in

some cases overrun the NTLDR boot-time registry size and halt.

Systems that are configured with more than 512 device paths (total

paths to all LUNs) should check with EMC Customer Service

before installing VERITAS Volume Manager 3.x.

Note: The C-bit is required on Symmetrix director ports connected to systems

running VERITAS DMP. Users of EMC ControlCenter 5.1 and higher should

consult their ControlCenter documentation for directions on making this

change. Other users must contact their EMC representative to make this

change.

Note: For CLARiiON arrays, failover mode one (1) is required for all DMP or

MPIO multipathing configurations.

VERITAS Volume Manager 3.0

If using PowerPath with VERITAS Volume Manager 3.0 with Service

Pack 1, you must also make the following registry modifications

before PowerPath devices will be available to the VERITAS

Enterprise Manager:

Use regedt32.exe to set the registry as follows:

HKEY_LOCAL_MACHINE\SOFTWARE\VERITAS\VxSvc\CurrentVersion\VolumeManager

value name = ShowGateKeeperDevices

data type = REG_DWORD

value = 0x1

HKEY_LOCAL_MACHINE\SOFTWARE\VERITAS\VxSvc\CurrentVersion\VolumeManager

value name = ShowEmcHiddenDevices

data type = REG_DWORD

value = 0x1

1 2 ... 121 122 123 124 125 126 127 128

Sin comentarios

EMC Qlogic QLA23xx Guía de instalación Pagina 126