EMC Qlogic QLA23xx Guía de instalación descargar pdf (Pagina 48)

EMC Fibre Channel and iSCSI with QLogic Host Bus Adapters in the Windows Environment

Installation and Configuration

Press Enter to return to the previous menu as shown in

Figure 29 on page 46.

• Option 3 (Edit Database) allows the appropriate WWN of the

array port, and the LUN address, to be specified for boot.

Figure 32 Example array port WWN and LUN values

Type 3 and press Enter.

Select 0 to select the first WWN database entry.

Press Enter.

The utility prompts for Entry 0 Port WWN.

16. Type the full WWN of the array port being used for boot and

press Enter.

The utility prompts for Node WWN.

17. Enter the same WWN used above and press Enter.

The utility prompts for the hexadecimal LUN address to be used

for boot;

18. Type the appropriate hexadecimal LUN value to be used for boot

and press Enter. Figure 32 shows example array-port WWN and

LUN values.

Note: This utility does not explicitly check the values entered for validity,

care must be taken to ensure that the proper array port WWN and LUN

addresses have been entered.

The utility will prompt for another WWN database entry to

modify,

19. Press Enter to return to the menu as shown in Figure 29 on

page 46.

20. Save the configuration changes by typing 11 (Write) and press

Enter.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 127 128

Sin comentarios

EMC Qlogic QLA23xx Guía de instalación Pagina 48