EMC Qlogic QLA22xx Guía de instalación descargar pdf (Pagina 66)

3-30

EMC Fibre Channel with QLogic HBAs in the Windows Environment

Configuring an EMC Boot Device

Configuring Additional Boot Port Name Entries in the Boot BIOS

To take advantage of the high-availability features of the HBA boot

BIOS, you must configure additional Boot Port Name entries in the

BIOS for any additional SP ports from which you want the BIOS to

attempt to boot during system startup. Depending on the failover

software installed, follow the appropriate steps:

1. Reboot the host

When the QLogic BIOS banner (shown below) appears, press

CTRL–Q.

Different HBA models may display different banners. Be sure to select

CTRL-Q for the HBA you wish to configure.

2. After Fast!UTIL loads, the display depends on whether there are

multiple QLogic HBAs installed:

• If there is only one QLogic HBA, the Fast!UTIL Options menu

appears.

• If there are multiple QLogic HBAs, a list of addresses occupies

by those HBAs appears. Use the arrow keys to select the

desired HBA; then press

ENTER. The Fast!UTIL Options menu

appears.

3. Select Configuration Settings from the menu.

4. Select Selectable Boot Settings from the Configuration Settings

menu.

The first Boot Port Name entry should already be configured (as

described under Configuring the HBA Boot BIOS on page 3-22).

If you want another SP port to be accessible as a potential boot

path to the current owner SP, select the next Boot Port Name

entry, and in the Device window select the CLARiiON port

WWN from which you want to boot.

5. If you have other HBAs for which you want to assign Boot Port

Name entries, you can press

ESC to go back to the main menu,

save changes, and select another HBA as shown in step 2. If the

QLogic Corporation

QLA2300 PCI Fibre Channel ROM BIOS Version 1.17

Press <CTRL - Q> for Fast!UTIL

www.qlogic.com

QLogic_Windows.book Page 30 Friday, May 27, 2005 3:53 PM

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 105 106

Sin comentarios

EMC Qlogic QLA22xx Guía de instalación Pagina 66