EMC Qlogic QLA22xx Guía de instalación descargar pdf (Pagina 28)

2-16

EMC Fibre Channel with QLogic HBAs in the Windows Environment

Installing and Configuring the HBA Driver

Installation Procedure for Windows 2000 and Windows 2003 Hosts

To install the driver into a Windows 2000 or Windows 2003 host,

follow these steps:

1. Boot the host with Windows 2000 or Windows 2003.

2. From the Windows taskbar, select Start, Programs,

Administrative Tools, Computer Management

3. In the left pane of the Computer Management window, click the

Device Manager icon.

4. If Windows Plug-n-Play does not detect your QLA23xx HBA

model, it will be listed as

Unknown or as a Fibre Channel

Controller

under the Other Devices icon in the right pane.

Windows 2000 configurations with Service Pack 1 or higher and

Windows 2003 configurations may be able to detect QLA23xx HBAs. If

this occurs, the HBA will already be listed under SCSI Devices; instead

of proceeding with these installation steps, follow the instructions under

Updating the HBA Driver in a Windows 2000 or Windows 2003 Host on

page 2-18.

5. Double-click the first instance of SCSI Controller under Other

Devices.

6. In the next window, click ReInstall Driver, then Next.

7. Select Display a list of the known drivers for this device so that

I can choose a specific driver, then click Next.

8. Select SCSI and RAID Controllers, then click Next.

9. Click Have Disk.

10. Enter the path to the diskette containing the driver (for example,

A:\), then click OK.

11. Select the appropriate QLogic HBA from the list of drivers that

appears; then click Next.

12. Click Next in the next window.

13. Click YES to continue the installation.

14. Click Finish to complete the driver installation.

15. The system requests that you reboot the system. Select NO and

click Close.

QLogic_Windows.book Page 16 Friday, May 27, 2005 3:53 PM

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 105 106

Sin comentarios

EMC Qlogic QLA22xx Guía de instalación Pagina 28