EMC QLogic Guía de instalación descargar pdf (Pagina 51)

QLogic v8.x-series driver parameters

Installing and Configuring the QLogic HBA and v8.x-Series Driver

2. Add the options line for the appropriate driver settings.

options qla2xxx ConfigRequired=0 ql2xfailover=0

For example, the /etc/modprobe.conf file on RHEL 4.0 might

look as follows:

alias eth0 tg3

alias eth1 tg3

alias scsi_hostadapter megaraid_mbox

alias scsi_hostadapter2 qla2xxx

alias scsi_hostadapter3 qla2xxx_conf

alias scsi_hostadapter4 qla2300

options qla2xxx ConfigRequired=0 ql2xfailover=0

And the /etc/modprobe.conf.local file on SLES 9 might look

as follows:

options qla2xxx ConfigRequired=0 ql2xfailover=0

3. After the modification to the file appropriate for your

distribution, a new ramdisk needs to be created and the host

rebooted.

• For Red Hat distributions, use:

cd /boot

mkinitrd -v initrd-$1.img $1

where $1 is the currently running v2.6.x kernel version.

For example:

cd /boot

mkinitrd -v initrd-2.6.9-22.ELsmp.img

2.6.9-22.ELsmp

• For SuSE distributions, use:

cd /boot

mkinitrd -i initrd-$1 -k vmlinuz-$1

where $1 is the currently running v2.6.x kernel version.

For example:

cd /boot

mkinitrd -i initrd-2.6.5-7.201smp -k

vmlinuz-2.6.5-7.201smp

4. Reboot the host.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 75 76

Sin comentarios

EMC QLogic Guía de instalación Pagina 51