EMC QLogic Guía de instalación descargar pdf (Pagina 19)

Upgrading the HBA BIOS

Installing and Configuring the QLogic HBA and v8.x-Series Driver

Upgrading the HBA BIOS

The BIOS may be upgraded using the QLogic SANsurfer GUI or

SANsurferCLI text interface, or by using a DOS bootable floppy.

Upgrading the HBA BIOS using QLogic SANsurfer

The SANsurfer GUI may be downloaded from the EMC-approved

section of the QLogic website. To update the BIOS using the

SANsurferCLI, please refer to the QLogic provided documentation

on their website for detailed instructions.

To invoke the GUI, run the following command from a terminal

window:

/opt/QLogic_Corporation/SANsurfer/SANsurfer &

When upgrading the BIOS for QLogic 4 GB HBAs, the minimum

required version of the QLogic SANsurfer GUI is 2.0.30b52.

Upgrading the HBA BIOS using QLogic SANsurferCLI

The SANsurferCLI (scli) is installed as part of the qlinstaller or may

be downloaded from the EMC-approved section of the QLogic

website. To update the BIOS using the SANsurferCLI, please refer to

the QLogic provided documentation on their website for detailed

instructions.

To invoke the CLI, run the following command:

/opt/QLogic_Corporation/SANsurferCLI/scli

When upgrading the BIOS for QLogic 4 GB HBAs, the minimum

required version of the QLogic SANsurferCLI is 1.06.16build23.

Upgrading the HBA BIOS using the NVRAM file on a DOS bootable floppy

Follow these steps to upgrade the QLogic BIOS using the NVRAM

file on a DOS bootable floppy:

1. Obtain the latest version of the BIOS from the QLogic website:

a. Access http://www.qlogic.com.

b. Click Downloads at the left side of the screen.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 75 76

Sin comentarios

EMC QLogic Guía de instalación Pagina 19