EMC QLogic Guía de instalación descargar pdf (Pagina 27)

Installation instructions for the QLogic v8.x-series driver

Installing and Configuring the QLogic HBA and v8.x-Series Driver

Installation instructions for the QLogic v8.x-series driver

Note: Only the QLogic v8.01.xx driver provides support for the 4 GB capable

QLA24xx/QLE24xx-series HBAs , not the v8.00.xx driver.

Installing the QLogic v8.xx.xx drivers

The QLogic v8.xx.xx driver is supported on

QLA23xx/QLE23xx-series HBAs for RHEL 4.0, RHEL 4.0 U1, and

SLES 9 SP1 hosts.

The QLogic v8.01.06 driver introduces support for the 4 GB capable

QLA24xx/QLE24xx-series HBAs. The v8.01.06 driver is supported

only on RHEL 4.0 U2 and SLES 9 SP2 at this time.

Neither of these drivers is included in Red Hat or SuSE distributions

and, therefore, they must be downloaded from the EMC-approved

section of the QLogic website.

Note: Please refer to the EMC Support Matrix for specific kernel versions

supported. Versions listed in the

EMC Support Matrix supersede all

revisions listed in this document.

Downloading the QLogic v8.x-series driver for the v2.6.x kernel

Use the following procedure to download the EMC-approved QLogic

driver from the QLogic website:

1. Use a web browser to access the EMC-approved section of the

QLogic website at:

http://www.qlogic.com/support/oem_emc.asp

2. Depending upon the EMC Storage Array being used, select the

appropriate link from one of the two following categories:

• EMC CLARiiON, EMC Symmetrix & EMC Celerra supported

software

• EMC CLARiiON AX100 supported software

3. After selecting a category, find the HBA model being used and

select the link to be transferred to the page of resources for that

HBA.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 75 76

Sin comentarios

EMC QLogic Guía de instalación Pagina 27