
Installing and configuring the QLogic QLA4010 iSCSI HBA (TOE)
95
Miscellaneous Planning and Procedures
3. In the dialog that appears, as shown in Figure 70, type in the path
to the firmware file that you want to load to the HBA, and click
Save.
Figure 70 Download Firmware dialog box
The firmware will be loaded to the specified HBA. After it loads,
SANsurfer will reset the HBA so the new firmware will take effect.
◆ Boot BIOS for the iSCSI HBA can be loaded in a similar fashion.
From the SANsurfer iSCSI HBA Manager, HBA Option dialog,
click the BIOS tab, as shown in Figure 71.
Figure 71 SANsurfer iSCSI HBA Manager, HBA Options, BIOS tab
Comentarios a estos manuales