EMC QLogic Guía de instalación descargar pdf (Pagina 29)

Booting from the external storage array

Installation and Configuration

IMPORTANT

In some cases, reinserting an internal drive (after having previously

removed it and configured a HBA for boot) may result in the

internal drive being re-enumerated as the first drive, and possibly

modifying the boot order, such that the server will attempt to boot

from the internal drive, rather than the intended array-based LUN.

Ensure that appropriate precautions are taken to make sure the

server will properly boot from an array-based LUN before

reinserting an internal system drive.

Legacy (x86 and most EM64T-based servers) boot BIOS configuration

During POST, the QLogic banner will be displayed.

1. Press Ctrl+Q to enter the Configuration utility:

Figure 6 QLogic banner

2. Select the HBA (enumerated by its I/O address) to be used for

boot.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 149 150

Sin comentarios

EMC QLogic Guía de instalación Pagina 29