EMC QLogic Guía de instalación descargar pdf (Pagina 110)

108

EMC Fibre Channel and iSCSI with QLogic Host Bus Adapters in the Windows Environment

Miscellaneous Planning and Procedures

8. Select the boot LUN you wish to use.

9. Save all settings and reboot the host and load the Operating

System. Refer to “Installing the Windows operating system” on

page 51.

10. After the operating system is loaded and before the initiator

service is loaded, register the remaining paths on the CX storage

array.

11. Install the Initiator Service for Windows 2003 only. Windows

2008 has the iSCSI Initator Service built in.

12. During the Microsoft Initiator installation, deselect the Software

Initiator. ONLY install the Initiator Service. This will attempt to

change the iqn name to fit the Microsoft naming convention.

Since this was done in Step 2, it will not blue screen the host for

an inaccessible boot device.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 149 150

Sin comentarios

EMC QLogic Guía de instalación Pagina 110