EMC QLogic Guía de instalación descargar pdf (Pagina 182)

182

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment

Configuring a Boot Device on an EMC Storage Array

6. Change to the system specific directory in the mod_devel_kit

path.

For RHEL 3.0:

[mod_devel_kit]# cd rhel3

7. Build the architecture-specific RHEL 3.0 driver diskette image by

decompressing the file

dd.img-

.gz, where

denotes the

specific type of architecture.

An example for an IA32 driver diskette image is as follows:

[rhel3]# gzip -d dd.img-i686.gz

An example for a 64-bit driver diskette image is as follows:

[rhel3]# gzip -d v1-dd.img.gz

8. Copy the architecture specific image dd.img-xx to a floppy.

An example for an IA32 driver diskette image is as follows:

[rhel3]# ls -las *

[rhel3]# dd if=dd.img-i686 of=/dev/fd0 bs=<

byte_size

An example for a 64-bit driver diskette image is as follows:

[rhel3]# dd if=v1-dd.img of=/dev/fd0 bs=<

byte_size

Using the driver diskette

During the installation of the Red Hat operating system, choose the

DD (driver diskette) option which will prompt you to insert the

floppy, or if a DD diskette option does not appear, type the following

at the boot loader prompt during installation:

boot: linux dd

If you have problems, type the following at the boot loader prompt

during installation:

boot: linux noprobe dd

Continue the installation by following the Red Hat instructions.

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 215 216

Sin comentarios

EMC QLogic Guía de instalación Pagina 182