Emc QLogic Manual de usuario descargar pdf (Pagina 50)

3-14

EMC Fibre Channel with QLogic HBAs in the Windows Environment

Configuring an EMC Boot Device

Configuring a CLARiiON Boot Device

This section describes how to install a boot device onto an EMC

CLARiiON

storage system connected to an Intel-based x86 class

server. You can then boot Windows from the storage system.

This section assumes that EMC did not prepare the server or the

storage system to boot Windows from the storage system.

SCSI hard disks are allowed in configurations that boot over Fibre

Channel. However, the BIOS for a SCSI disk’s SCSI adapters must be

disabled. You should also disconnect any SCSI disks before installing

Windows.

Procedure

Flowchart

The installation procedure includes steps you must follow in a

specific order. The following flowchart outlines the major steps.

QLogic_Windows.book Page 14 Thursday, March 10, 2005 10:31 AM

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 103 104

Sin comentarios

Emc QLogic Manual de usuario Pagina 50